Exhaust Help
#1
Senior Member
Thread Starter
Exhaust Help
Hello all. Quick question. I plan on redoing my exhaust soon. I have a SISO magnaflow now, and I want to go with a dynomax bullet with a y pipe to duals. The magnaflow appears to be 3" inlet/outlet and steps the stock exhaust up to that. My question is, should I do a 3" midpipe with the bullet and out to 2.5" duals, or should I go with 2.5" midpipe and then out to duals? I'll attach some pics of the current setup. Comes down to which bullet to order. 3" inlet and outlet or 2.5"??
#3
Senior Member
oem/factory exhaust size is 2.75 so it is really what you pick
step it up to 3 then out
step it down to 2 1/2 then out
i found this all out when i did a muffler si/so replacement and a tip, had i known i would have gone with the 3 myself instead of the 2 1/2 that flowmaster spec's
step it up to 3 then out
step it down to 2 1/2 then out
i found this all out when i did a muffler si/so replacement and a tip, had i known i would have gone with the 3 myself instead of the 2 1/2 that flowmaster spec's
#4
Senior Member
Thread Starter
oem/factory exhaust size is 2.75 so it is really what you pick step it up to 3 then out step it down to 2 1/2 then out i found this all out when i did a muffler si/so replacement and a tip, had i known i would have gone with the 3 myself instead of the 2 1/2 that flowmaster spec's
#5
Senior Member
I used my caliper to check it out o.d is 2.75, at least that is what mine is from factory, I would not think they would have multiple tubing sizes from factory
#6
#7
Senior Member
Before and after muffler and tail pipe, mine very well could be different best thing to do is grab a caliper if you have access to one and check it out
Last edited by wirenut2002; 03-06-2015 at 10:16 AM.