electrical issue need help please
#1
Senior Member
Thread Starter
electrical issue need help please
OK so tonight when I left work I noticed that my hi beam indicator was on as were my fog lights however my hi beams were not on by the multi function switch so I tried to use the hi beams when I pull back to flash them the lot on the dash lights up but no hi beams when I push forward all of my lights go dead but still have the dash indicator on. Now when the foods are on as I said the dash indicator is also on but it is faint or not as bright as the hi beams. What could cause this I changed my headlamp bulbs out about a month ago or so to 5000k 55/65 watt super white bulbs off eBay and haven't had an issue I had an issue with the fog bulbs bit replaced them immediately. Please help I know nothing when it comes to electrical Thanks
#2
Senior Member
Thread Starter
Scratching my head with this checked all my wires fuses bulbs everything looks good what else can it be I will be the first to admit I am stupid when it comes to things like this electrical is not my area of expertise
#3
Member
Unfortunately this is one of those type of "Hands on" situations where you need a tech with the skills to trace down and pinpoint the problem, it could be as simple as a bad bulb but could also be something electronic.
.
.
#4
Mark
iTrader: (1)
I would check the wires coming off the head lights and the relay
#5
Senior Member
Thread Starter
#6
Mark
iTrader: (1)
humm.. maybe somebody will chime in that this has happened to..
#7
Senior Member
Try disconnecting your battery terminals and touch them together then try your lights. You probably have a short like I do but give that a shot and let me know
Trending Topics
#8
Good Mawnin';
You can try to use the state diagram to diagnose yer switch:
If the switch checks out, it may be a grounding issue.
Full diag thread for someone with similar symptoms found here: http://www.f150online.com/forums/ele...f-its-bad.html
For the MFS, you should be able to find similar diags via Google... (or *cough* [MENTION=134559]Rnlcomp[/MENTION] *cough* could post up an MFS state diagram...). OR - you could look in that thread and follow the links to the archive of schematics - the MFS diag state digrams are also in there if you dig around enough - (e.g: http://www.f150online.com/forums/mem...-mfs-turn.html )
Best of luck
MGD
You can try to use the state diagram to diagnose yer switch:
If the switch checks out, it may be a grounding issue.
Full diag thread for someone with similar symptoms found here: http://www.f150online.com/forums/ele...f-its-bad.html
For the MFS, you should be able to find similar diags via Google... (or *cough* [MENTION=134559]Rnlcomp[/MENTION] *cough* could post up an MFS state diagram...). OR - you could look in that thread and follow the links to the archive of schematics - the MFS diag state digrams are also in there if you dig around enough - (e.g: http://www.f150online.com/forums/mem...-mfs-turn.html )
Best of luck
MGD
Last edited by MGD; 05-18-2014 at 10:17 AM.
The following 2 users liked this post by MGD:
08silverbullet (05-18-2014),
Chromeshadow (05-18-2014)
#9
Member
@Rnlcomp *cough* could post up an MFS state diagram...).MGD
Don't know what year truck they are working on, if I am to assume it's an 08 per the screen name then I wouldn't have it any way, I have info for 96-99, 04-05, and 13 only.
I wouldn't want to put info out there not pertaining to the actual year model, Fords manuals are not known for their greatest accuracy.
.
#10
Senior Member
Thread Starter
I am Goin to put my old bulbs back in and see if it's these cheepo bulbs from eBay if so I'll go pick up some new ones from the parts house. If not a few people have mentioned the MFS I'll look into it also. I never use my high beams it just bugs me that something is wrong with my baby lol