E-3 plugs for 2004 F-150 5.4 3 valve
#11
I have E3's in mine and see no difference. Local auto parts store had them 50%off, so I figured why not.......I had to do plugs and coils anyway.
I have used E3's in my commercial lawn equipment with outstanding results...... Just not a difference in my truck.
I have used E3's in my commercial lawn equipment with outstanding results...... Just not a difference in my truck.
#12
Senior Member
Lawn equipment is exactly where they belong.
#13
OK. The EDGE programmer was set for trans warning at 232. The trans cooler with a fan did keep the trans below this setting this time. It did get up to 212 and bounced between 211 and 212. However, now that I'm not stopping to let the trans cool, the oil heat light on the EDGE comes on at 250. As long as I let off the gas a little it stays at 250 and doesn't climb. But the Long fluid cooler with the fan worked great. I only go up the steep hill once a year, and next year we should get drawn for X-1, not B zone. That hill out of Weed ca over Stewart Springs road is steep. Also, there is half of a lane that washed out and there is no warning, your going up the hill on your side and all of a sudden your side of the road isn't there. Looks as if the culvert back washed under and took out the uphill lane. I did have enough to get the truck and trailer by.
Happy Hunting to all you deer hunters this year. Rough going due to no bad weather. It has been 85 to 90 in the day and 45 at night.
Thanks,
a56nomad
Happy Hunting to all you deer hunters this year. Rough going due to no bad weather. It has been 85 to 90 in the day and 45 at night.
Thanks,
a56nomad