Walshy569

hey guys i picked up this 2005 f150 screw 4x4 with a 5.4L about 2 months ago when i first saw it at the lot i knew it looked taller than normal just wondering if you guys can tell me if its leveled or not it looks it but I'm not sure thanks guys!

nrivera04

Looks like a leveling spacer on top of the front strut to me. The back is probably untouched, that's just a load adjusting shock that's been installed. We'd need a picture of the spring perch to see if anything's been done back there.

corey_lax

Yes, you have a leveling kit

Walshy569

awesome thanks guys

Walshy569

if i wanted to know how many inches the leveling kit is should i just measure the from the to of the shock mount to the bottom of the spacer? and how do i know what brand

nrivera04

Yes, spacer height will tell you the amount. Good luck on brand... EVERYBODY makes them these days and there's really no definitive way to tell.

powerranger262

Pretty sure the spacer itself, isn't going to be exactly 2", 2.5", or 3". I never measured my spacer, but I know I heard it on here somewhere.

powerranger262

And I can tell you that it's not a 2.5" Hell Bent Steel kit.
Here is mine.

Walshy569

So do you think it's bigger than 2.5?

Dirttracker18

No you cannot. The spacer is not the same as the lift you get from it. You need to take into account the geometry of the LCA relative to the position of the strut mount on it.