BJV269SS

I decided that it was time to get the job done after putting it off in case I broke a plug. The job took me about 4 hours. I could go faster if I did another I suppose... They all came out with out a hitch except the first plug drivers side. IT broke. I had bought the Lisle plug removal tool just in case. The tool is the *****! I had the broken piece out in less than 5 minutes. The truck has 91K on it and was starting to run a bit rough. All the electrode ends were worn down to the case. What a difference in the way it runs. All in all not such a bad job. The passenger side fire wall plug is not one I would like to see break. I'll post a photo if anyone wants to see what the plugs look like.

Ftruck05

Good job man. That was a task I avoided by trading the 05 for an 09.

Lenn

Nice man. Pics would be cool.

BJV269SS

Here are the photos of my plugs. I hope they show how worn some were.

Ftruck05

The 2 on the far right look decent. Where did those come from?

BJV269SS

They came from the passengers side bank. First two from the front. All in all no carbon really on any.