Custom Center Console Build
#13
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Kerrville, Tx
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Jason, I haven't done much to it since my last post. I finished the box up and lid, waiting to cut the holes for my sub and such till I figure out what I want exactly. I am probably going to go to a stereo shop here tomorrow and talk a guy I know there. Hoping to get it and the rest of my interior done by august, when school starts back up. I ordered my carpet to replace the rubber floors that are in it right now. Here is a link to my photobucket with some pictures on it, http://s1080.photobucket.com/albums/j337/BENWGARRETT/
#14
Platinum Man Card
/sigh, if only my shifter wasnt on the floor i would have done this right after i got the truck.
i would section off the area behind where your sub is for a enclosed box. helps with sound and protects the rear of the sub. prob doin that anyway though
i would section off the area behind where your sub is for a enclosed box. helps with sound and protects the rear of the sub. prob doin that anyway though
#18
Junior Member
Thread Starter
Join Date: Mar 2011
Location: Kerrville, Tx
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
Well I finally got around to getting my sub, went with a JL 10W3v4-4. One question I have is do I need to subtract the driver displacement from the total volume of the box for the recommended volume or do I not take the displacement into account.