Codes..... Help please
#1
Senior Member
Thread Starter
Codes..... Help please
Got a code p0053 the other day it says heater risistance bank 1 sensor 1.today I got two more with that one p2196 (sensor signal biased/stuck rich-bank 1/ sensor 1) and I forget what the other one because I cleared them and only these two came back on . So I know it's a problem with the o2 sensor but is there anything I can check before I order my new sensor to make sure that's what it is. Thanks in advance
#2
Member
Got a code p0053 the other day it says heater risistance bank 1 sensor 1.today I got two more with that one p2196 (sensor signal biased/stuck rich-bank 1/ sensor 1) and I forget what the other one because I cleared them and only these two came back on . So I know it's a problem with the o2 sensor but is there anything I can check before I order my new sensor to make sure that's what it is. Thanks in advance
Well you could start by telling us what you drive. Year, model, engine etc... No mind readers in this forum unfortunately.
.
#4
Member
IIRC there is a fuse for the heated circuit part of the O2 sensors, start there. Don't remember if it's the under the dash fuse panel or under the hood in the power distribution box. With that said check all fuses just to be sure.
.
.
#5
Senior Member
Thread Starter
I checked the fuse it's good anything else to check like is there power to the plug at all times sorry to be a pain money is a little right right now and don't want to buy a part if I don't have to
The following users liked this post:
racecrew25 (07-03-2014)
#6
Senior Member
Resistance check on the o2 heater wires will show if its an open circuit or not that will eliminate the sensor heater and yes it will recieve voltage until the engine reaches proper temp. They should be 2 grey wires for the heater.