chips and programmers etc
#11
Member
Thread Starter
Join Date: Jan 2008
Location: midwest
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
personally everything you want sounds great except for the CAI. I would look at the Gotts mod for your intake and try that first. Total cost for this about $6.00 I did it on my wifes 07 Screw 4x4 with a 4.6 and noticed a vast improvement. All you have to do is take the tube off the end of ur filter box and replace it with a 3" pvc pipe cut 4.5" long. You will need to sand the end of it down considerably to get it to fit into the original hole. But the work saves you $250.00.. You dont get any of the engine heat this way either. You can go to FordF150.net to look up the Gotts intake mod.
I like that ideal yes i do... i can see paying 300+ for a tube either... shoot i think i can get 6 bux off my floor... so this may happen TOMORROW>>.
#12
Senior Member
I hear ya... when people talk about something like whitecrystal1 has about his setup it must be really nice. I have been looking and lurking (and trying to save some money) to see where I need to start.. sct xcal3 is going to be first, exhaust second and a few things like cai, underdrive pulleys etc in between. thanks everybody for the info.
#13
Member
Thread Starter
Join Date: Jan 2008
Location: midwest
Posts: 359
Likes: 0
Received 0 Likes
on
0 Posts
tide you are absolutely right.... the reason i wanted to put exhaust off was price... but i got a friend in tennessee (backhome) that can give me a little discount and get the complete kits etc..