Changing rear gears only
#1
JACK
Thread Starter
Join Date: Jun 2008
Location: Tampa
Posts: 479
Likes: 0
Received 0 Likes
on
0 Posts
Changing rear gears only
I'm sure this was covered....i just can't find the thread
I have a 2008 4x4 5.4 with 3.55's...I really want to change my gears to 4.56's but since its the summer i really only want to do the rear......but i know if i don't do the front now i might not until tax time next year....
How bad would i mess up my front gears if i only changed the rear gears??
I have a 2008 4x4 5.4 with 3.55's...I really want to change my gears to 4.56's but since its the summer i really only want to do the rear......but i know if i don't do the front now i might not until tax time next year....
How bad would i mess up my front gears if i only changed the rear gears??
#3
#4
Senior Member
Join Date: Jun 2009
Location: Southern Maine
Posts: 269
Likes: 0
Received 0 Likes
on
0 Posts
if you change just the rear gears and use you 4 wheel drive you will destroy your front dif / transfer case / transmission because your differentials will be moving at different speeds, that transfers into the transfer case and into your tranny and there is no way to adjust for that difference. YOU WILL BREAK SOMETHING!!!!! I would highly recommend not doing the gear swap until you can afford both. but if you do choose to do the rear only I would do as previously stated and pull the front drive shafts. don’t even chance it.
#5
Mark
iTrader: (1)
As long as you do what was mentioned above...remove the front shaft you will not hurt anything.