ctalbz

I need to know if I can fit 35s. I also want to get new wheels. I know I want them to be about the same offset as my stock wheels. What is the number on that offset?

Trent W

I have 35" cooper SST mud tires on my 06 with a level kit. Don't remember the offset but i had the stock rims with these tires on my truck with no problems, I do have the 3" level kit though. IF you haven't noticed i did trim my plastic on my front bumper a bit and also the plastic inside the fender. IF you have the stock fender flare's like mine you can pull those off trim your actual fender steel till its flush with the body you'll get about an inch and angle it up so it gradually goes up to about 8 inches up your fender then all you do is put your flare back on and drill a new hole at the bottom and inch farther back and you have more room and you cant even tell you trimmed it. I attached some pics to show you what i mean of my truck. I only did this cuz I go wheeling a lot and it rubbed a little bit when my suspention was flexed all the way and turned. But gutters and around town it never touched before i trimmed it.

Trent W

oops sorry double attached the rear here is the front of the fender and what the bumper looks like with the trimmed plastic

zmadams

The offset for stock 18 inch rims are +44. I had my 35's on the stickers for a while and everything worked fine.