Borla Exhaust
#1
Junior Member
Thread Starter
Join Date: Nov 2007
Location: San Jose CA
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
Borla Exhaust
Hey Guys!
Just got in my Borla exhaust for my F150 4x4 crew. The question is could I install this in my garage? It says use a lift but I am lift-less.
http://www.borla.com/applications/lo...System/140136/
Just got in my Borla exhaust for my F150 4x4 crew. The question is could I install this in my garage? It says use a lift but I am lift-less.
http://www.borla.com/applications/lo...System/140136/
#2
Senior Member
yes, you will just have a harder time getting stuff in there.
do you have a set of tire ramps or jack stands you could put the back of the truck up on? You could go out and get 2 jack stands for under 50 bucks, and have the back of your truck an extra foot off of the ground, and it would be much easier to get the exhaust on.
do you have a set of tire ramps or jack stands you could put the back of the truck up on? You could go out and get 2 jack stands for under 50 bucks, and have the back of your truck an extra foot off of the ground, and it would be much easier to get the exhaust on.
#3
Senior Member
Join Date: Jan 2008
Location: Powhatan, VA
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
I don't know but congrats. I am about to install my just delivered Roush exhaust. I think you should be able to. I installed a complete X with cat back system on my 03 Cobra a few years ago.
#4
Junior Member
Thread Starter
Join Date: Nov 2007
Location: San Jose CA
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
TY thanks, I will borrow my friends ramps. I am really excited to get this installed.
JohnC Great! Congrats on your Roush exhaust. I was looking at that as well for the extra money I just got the borla. It was only $420 to the door. Couldnt complain to much.
JohnC Great! Congrats on your Roush exhaust. I was looking at that as well for the extra money I just got the borla. It was only $420 to the door. Couldnt complain to much.
#5
Senior Member
Join Date: Jan 2008
Location: Powhatan, VA
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
I just installed my Roush SID out exhaust and it was very easy. I had to jack up the left side of the truck with my floor jack under the frame to get the stock system off. The rest was gravy. It took me and my son about an hour. Good luck.
Trending Topics
#8
Senior Member
Join Date: Oct 2007
Location: Westlake, OH
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
I got a borla too. The hardest part and the only part you need a jack on is to get the whole factory exhuast out in one unit otherwise if you cut the old one up then no probs at all!