Ashtray removal?
#1
Junior Member
Thread Starter
Join Date: May 2007
Location: Flagstaff Az
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Ashtray removal?
Funny deal here....Dropped a necklace, dont ask how, behind the tilt out ashtray. I took out the cup but I cant figure out how to take out the whole thing. Need to get behind it.
Has anybody removed one?
Has anybody removed one?
#2
i know how it not hard at all. u get nut driver , and take out the sides, and then pull oput the whole thing, thats all, keep the sprin gand etc together so when ya put it bac iut works like new.
#5
Get a small flathead screwdriver and carefully work your way around the woodgrain face where your stereo and a/c are at. You must pry it out slowly use a piece of cardboard to pad the screwdriver so it dosen't scratch your interior, it just snaps in. The cover has your seatbelt and cigarette lighter wires attached so don't break the wires just un plug them. After removing the cover you will see the screws that hold your ashtray in place remove them and there u are. The a/c and stereo cover is pretty tight so it will take a little work. If you are tired of your ashtray rattling cut a couple pieces of 1/4 vacume hose about 1/8" long (like a little doghnut) and slip them on the two prongs where the ashtray locks in and that will stop the rattleing too. Good luck!!
Trending Topics
#9
Junior Member
Thread Starter
Join Date: May 2007
Location: Flagstaff Az
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
I'm not that dumb of a guy.....
Wood grain? Not sure what you are talking about.....
CUP HOLDERS? Where oh where did you get that? ASHTRAY LOL!
I have looked, pulled, pried and to hold back from breaking the thing off, I don't know what to do. I cant see ANY screws, ANY bolts, ANY snaps or anything else other than the tilt off trey, I don't know what to do. Dino mite? In my eyes, its not as simple as you are making it sound? Maybe i'm missing something.....