Duane

Been having discussion on this but I figured I'd come back to square one on it.

I have a 2WD at stock right now. Nothing done yet. Lets say I had a 6" Pro Comp, Stage 1 lift put on it.
My current (stock) wheels are as follows:
17x7.5
Backspacing: 5.50 inches
Offset: 44mm (1.73 inches)
----------------------------------------------------------
For the lift, I would like to replace those stock rims with the Pacer Ridgeline. Their specs are is as follows:
18x10
Backspacing: 4.52 inches
Offset: -25mm
-------------------------------------------------------------------
If I were to actually mount these Ridgelines, the change is as follows:
The Inner clearance would increase to 37mm (1.45 inches) MORE.
(That is - the inside of the wheel to the strut housing)
The Outter clearance would EXTEND an extra 101mm (3.97 inches).
(That is - position of the outside edge of the wheel)
--------------------------------------------------------------------
Then I put on 35x12.5x18 Nitto Mud Grapplers.

***** WILL THIS WORK?? *****
Thanks guys!