harleydavidson865

Will someone pleaseeee tell me where to run the power wire for a amp through the fire wall of a 07 f150

Nothin' Fancy

There's a rubber grommet above the brake pedal to the left. Look under the good and you can see it easier close to the master cylinder

Especial86

iTrader: (1)

Right here buddy... Its a straight shot right from the battery...

Nothin' Fancy

That's so much easier than my method

Especial86

iTrader: (1)

Lol! Yeah it's a good clean shot. If you tape your wire to a chopstick and feed it through, it can be done rather quick.

Benhicks24

I really wish I would've known that was there. Lol. I did what the first guy mentioned... ran the wire up to the wiper cowl almost in a grommet so it won't overheat, and came through by the driver's feet. Looks 10X easier.

KC-F150

I ran my 0/1 Gauge wire through that little rubber grommet above the brake pedal.

Would it fit through that other spot?

harleydavidson865

Thank you sooo much. Chop stick huh? Clever thank you!! I just put in my new radio now doin amp and sub!

Especial86

iTrader: (1)

My wire is a 4 gauge and there is plenty of room for a zero gauge..

Here's the rest of it... Fox box single 10" sealed box with a JL w3v3 4 ohm sub and an SSL 1600 watt amp....