All of my power windows stopped working...
#1
Senior Member
Thread Starter
All of my power windows stopped working...
Like out of no where.
I had my windows down.
Got to a store, rolled them up.
Came out about 20 minutes later.
And now none of them will roll down.
WTF?!
How does this all of the sudden happen?
I changed out the 30A breaker, so that is not it.
Any other ideas?
It is killing me not being able to roll down my windows.
I had my windows down.
Got to a store, rolled them up.
Came out about 20 minutes later.
And now none of them will roll down.
WTF?!
How does this all of the sudden happen?
I changed out the 30A breaker, so that is not it.
Any other ideas?
It is killing me not being able to roll down my windows.
#2
Mark
iTrader: (1)
Are you tring to roll them down from the drivers control...or none of them work ??
#3
Senior Member
Thread Starter
None of them work.
So I know that it isn't the motors.
They all just stopped working.
I can not roll down a single window from either of the 4 doors.
So I know that it isn't the motors.
They all just stopped working.
I can not roll down a single window from either of the 4 doors.
#7
Senior Member
Thread Starter
I do have a voltage meter.
And I changed the driver side switch with a friends that does work. And still nothing.
I did not check the ground, I'll do that right now.
And I changed the driver side switch with a friends that does work. And still nothing.
I did not check the ground, I'll do that right now.
Trending Topics
#8
My 05 screw did the same thing, and I took it to dealership and they said it had 5 wires broke in the drivers door.That was the first of this year and the damn things quit working again last week. I'm going to try to fix them sometime this week myself since it's not in warranty.
#10
Senior Member
Thread Starter
Tested at the connector, and I didn't get a reading.
I tested the power locks just to make sure, and I got a nice reading of 12.3
So, what is the next step?
A broken wire? Is there another fuse or relay besides the 30a breaker?
I tested the power locks just to make sure, and I got a nice reading of 12.3
So, what is the next step?
A broken wire? Is there another fuse or relay besides the 30a breaker?