djfllmn

iTrader: (1)

x2

techrep

iTrader: (1)

Where do you think the A/C drains when it can't drain out what it's meant too... clean and treat the corrosion ...then re-paint, but you may want to un-clog your A/C drain line first.

notastockdohc

I'm in the process of fixing it with 3/4 90 degree elbow, got a wire wheel to clean the rust shop vac, then duplicator rust killer then paint and clear it. Guys I was just feeling discouraged between this floor board rust the cab corner rust bs. Ect

notastockdohc

Question what's the best way to make sure it isn't clogged that drain is in a very very tight area

notastockdohc

Well got a 3/4 inside dia rubber 90 degree bend hose cut it down some to fit in the right area I used a small smear of gorilla glue on it to make sure it stays put. Looks like my ac was dripping behind a aluminum heat shield and a heat blanket. But I got the new extension to hand down past the O2 sensor. I Do know one thing you remove that fender well and look in behind the rocker towards the bottom where the drain is omg its a dirt trap.

notastockdohc

? So what else should I watch for

notastockdohc

Success installed a 90 degree rubber elbow draining like a champ