700 hp 5.4 f150 build
#31
Junior Member
Thread Starter
I defiantly will after I get it running good the price of the turbo you suggested blew me away but I know you pay for what you get hope fully I'll order the rotating assembly in the next couple weeks ready to get this build rolling
#32
$1599 is not bad for what your getting.... Concider a supercharger that can make the same power is $2000-$3000 just for the blower itself. For the same price you can get the same turbo I run in my cobra thats good for 1200 hp at the crank. Thats the Precision 7675 billet wheel but, it won't spool quite as fast as the 7175. Now your power goal is 700 crank or wheel hp?
Last edited by FANGS99; 07-27-2014 at 10:35 PM.
#33
Junior Member
Thread Starter
I am wanting to get around 700 crank also some on suggested using 03 or 04 cobra injector and a Kenny bell boost a pump what is your thoughts on this and looked into the boss intake instead of the roush lower can't find a adaptor so I emailed MMR hopefully the can make one
#34
Senior Member
iTrader: (1)
Keep in mind you will need a remote oil pump to get oil to the turbo and High flow cats are a must. The reason why the exhaust wheel on mine is chipped is due to cat converter shooting pieces of material through it when it blew apart.. It still works with the chips on the wheel, but for the cheap money it takes to fix it I wouldn't leave it as is..
I can get you pics of the turbo and parts if you'd like.. H
Last edited by Especial86; 07-28-2014 at 12:05 PM.
#35
.63 AR will choke the engine up top..... My little 4.6 spools its 7675 almost instantly with a .96 AR....... That turbo would be good for a twin setup... But the OP needs a T4 flange setup to allow the engine to breath through the whole rpm range. It's not good to maxout a turbo or run it above it's efficiency range. 700 crank hp is around 500 rwhp and the 7175 will be good for over 700rwhp. OP, the turbo I spec'd has 2 exhaust A/R housings and they are only about $100 each so you could order it with the larger .96 AR and if you want a faster spool order the .81 AR housing
Last edited by FANGS99; 07-29-2014 at 03:31 PM.
#36
Junior Member
Thread Starter
.63 AR will choke the engine up top..... My little 4.6 spools its 7675 almost instantly with a .96 AR....... That turbo would be good for a twin setup... But the OP needs a T4 flange setup to allow the engine to breath through the whole rpm range. It's not good to maxout a turbo or run it above it's efficiency range. 700 crank hp is around 500 rwhp and the 7175 will be good for over 700rwhp. OP, the turbo I spec'd has 2 exhaust A/R housings and they are only about $100 each so you could order it with the larger .96 AR and if you want a faster spool order the .81 AR housing