4x4 low?
#1
King Air 200 Captain
Thread Starter
4x4 low?
Hey guys, I was wondering if anyone has had an issue with their 4 low engaging? When I turn the **** to 4hi, it engages no problem. When I turn it to 4low, there is no noise and the light on my dash does not illuminate. Please let me know if you guys have had a similar problem.
#2
Senior Member
I have the same issue. You have shift-on-the-fly 4x4, correct? Mine has it as well. Strangely my Ram 1500 requires that you come to a full stop, shift into neutral, then shift from 4HI to 4LO and then shift back into drive. On my Ram I have the manual transfer case. Maybe Ford's electronic transfer case is different. I have tested my 4HI and it works well. Do you have access to the owner's manual? My vehicle never came with one when I purchased it.
#3
King Air 200 Captain
Thread Starter
Yes, I have the shift on the fly, but it does not work rather I'm moving or not. I have a manual, but it doesn't mention anything about this issue.
#5
You have to stop, put the transmission in neutral, foot on the brake, the shift from four hi to four low. Same procedure to shift from lo back to high. Defiantly a pain in the ***.
#6
Mark
iTrader: (1)
X2....will not engage unless you take the steps above
#7
King Air 200 Captain
Thread Starter
I realize this, but even when I am standing still with tranny in neutral, it does not engage. It is quite annoying. Thanks for the feedback, keep it coming.
Trending Topics
#8
and just a recap:
1. Foot on break
2. Truck in neutral
3. Turn **** to 4L
4. hear engagement, light comes on
5. Put back into drive, truck will lurch forward, ready to go
6. Don't get stuck!