4" lift and 35s ?
#21
KRANCHO07
Join Date: Dec 2011
Location: Central Mississippi
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
#22
Originally Posted by BUCKSHOT
I dont' see how that is going to work. I have 4" Rancho and 35's and that is all it can handle without rubbing pretty severe. And with what I have, I still get slight rubbing when the wheels are turned and hitting pretty severe bumps.
#24
I have a 3" lvl with 33's and they still rub a smidge, I don't think u can fit 35's with just a lvl... the 4" lift should fit 35's also superlift make a 4.5" lift and u can for sure run 35's on that
#25
Senior Member
Originally Posted by duffy
I have a 3" lvl with 33's and they still rub a smidge, I don't think u can fit 35's with just a lvl... the 4" lift should fit 35's also superlift make a 4.5" lift and u can for sure run 35's on that
#26
Jerry
All depends on backspacing and offset of your wheels. Here's mine with 2 inch level and 315/70/17 (near 35x12.5) and no rubbing. Key is wheels are 8 inches wide with 5.43 inches bs and a +25 offset. Real similar to stock.
Last edited by jerrybizzle; 02-14-2012 at 03:13 PM.
#27
Ya its Dipped, Hate Away
Originally Posted by duffy
I have a 3" lvl with 33's and they still rub a smidge, I don't think u can fit 35's with just a lvl... the 4" lift should fit 35's also superlift make a 4.5" lift and u can for sure run 35's on that
#29
Jerry
315 which is 12.4 inches wide so I doubt much wider. It's probably your offset being negative. Do your tires stick out past the fenders? Mine are nearly flush which helps avoid rubbing.