95 f150 5.8

Will I be able to run 35/12.50-18 toyos on my stock wheels until I can get new wheels. Truck Will have a 6 inch lift on it?

techrep

iTrader: (1)

not recommended but, people do it...

KCCOFox

The tire will bub on the sterring knuckle with that kind of tire width and stock wheel back spaing. You could add a set of wheel spacers to alleviate the problem if it is only going to be until you get new wheels.

snowborderus

Depends on which Toyos you'll run. If it's the A/Ts, should be ok (using 'ok' loosely) but still may rub on the UCA. If it's the M/Ts or R/Ts, I'd say no. Those are a very hard and wide 12.5" tire.

Kenny1249

I put a 305 bfg on my stock 18. While it looked fine it caused the tires to wear prematurely they are too wide for a stock wheel

RGV FX4

iTrader: (1)

I'm running a 6" lift with stock FX4 wheels on 35's and 2 inch spacers. No issues at all.

powerranger262

Rotate them and keep your air pressure right and there really shouldn't be an issue.