kawasakiz

Just wondering if anyone could help me out. Putting 24 inch rims on a 2005 f150 lariat and wasnt sure of everything i need to get to make this work any help would be great

Lenn

A 1992 Chevy Caprice that has no paint left to speak of, a broken out grille, a saggin headliner and possibly one taped up window.

Just kidding, I have no idea. Good luck though. A vehicle this heavy on that large of a wheel and inevitably rubber band thickness tires will most likely net you a few replacements or repairs in the not so distant future.

f150mashin559

is your truck 2wd or 4wd? if its two you shouldnt have any problems with the rear end but with a four u might have a few problems with the cv's

LSUFX2

I know someone with an 06 and had to replace the tranny bc of 24's, my opinion its not worth it bc it rides like crap and tears up your suspension and brakes.

kawasakiz

sorry for not mentioning that its a 2 wheel drive had the truck since new just want to change it a bit if i dont ill want to buy a f250

Seedless16

well my buddy has an 06 with 24's. I know that his rear end is dropped to match the front. He said all the tech did was use lil spacers and that was it

Seedless16

It looks clean as hell and only sticks out like inch or more possibly

bshelton

looks like you will just need the rims and some lug nuts plus a jack to get the truck of the ground and a lug wrench, that should do it. oh yah almost forgot you will need 4 tires as well. good luck post some pictures when its done. if you need any more help just let us know.