2008 f150
#1
2008 f150
Ok guys. I have an 2008 f150 4x4. My drivers side hub is making an noise. It goes away when I turn left. So the noise is only when I'm going right or straight. The hub is new. Yes the vacuum is working when motor is on. I'm lost. No water in hub?????? What else could it be. Thanks.
#2
It could be a crack in the vacuum line that only shows up when you turn the wheel. Also make sure the axle end but under the dust cap is torqued properly. Read here: https://www.f150forum.com/f72/how-di...m-esof-186872/
#4
Ok guys. Both sides has very good vacuum with motor on. I pulled line off hubs and you can feel the vacuum. Now it only makes the sound going straight or turning right. Any possible way the blabber or gasket is going bad on the back side of the hub?
#5
That is the IWE. Pull it and check operation per my link above.