2006 5.4 wont turn over/ possible injector issue
03-13-2014, 12:30 PM
#1
Junior Member
Thread Starter
Join Date: Feb 2014
Location: St. Louis, MO
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
2006 5.4 wont turn over/ possible injector issue
2006 5.4 145,00 (ish) miles.
(Background info)
I had some shuddering/hesitation at low rpm...changed some coils (i dont want to touch the plugs until its warm outside so hopefully i dont break them ALL off) after changing the coils it ran a whole lot better...now rarely i can notice i guess a "jump" or hiccup around 60 give or take 5mph around 15rpm. Cleaned the MAF. Changed the PCV. And yes ive used seafoam...
ANYWAYS.
Went out to the truck today going to work...put the key in, engine cranks but wont turn over...ive gotten a P0206 (injector circuit cyl 6 open) and other codes within the last 2 months...and the codes just keep jumping around... like bank 1 too lean, bank 2 too lean, cyl 6, 7, 2 misfire... so the P0206 im thinking something is triggering all these codes...
WTF is it....
checked the fuel filter, looks like whom ever had it before changed the filter because the quick release on the hose is snapped off...and would only happen if someone forcefully did so...
i was going to clean the throttle body...before this morning happen....
injectors? starter? it cranks but wont turn over so im not sure its the starter.
so any suggestions??? help please
(Background info)
I had some shuddering/hesitation at low rpm...changed some coils (i dont want to touch the plugs until its warm outside so hopefully i dont break them ALL off) after changing the coils it ran a whole lot better...now rarely i can notice i guess a "jump" or hiccup around 60 give or take 5mph around 15rpm. Cleaned the MAF. Changed the PCV. And yes ive used seafoam...
ANYWAYS.
Went out to the truck today going to work...put the key in, engine cranks but wont turn over...ive gotten a P0206 (injector circuit cyl 6 open) and other codes within the last 2 months...and the codes just keep jumping around... like bank 1 too lean, bank 2 too lean, cyl 6, 7, 2 misfire... so the P0206 im thinking something is triggering all these codes...
WTF is it....checked the fuel filter, looks like whom ever had it before changed the filter because the quick release on the hose is snapped off...and would only happen if someone forcefully did so...
i was going to clean the throttle body...before this morning happen....
injectors? starter? it cranks but wont turn over so im not sure its the starter.
so any suggestions??? help please
03-14-2014, 10:33 AM
#2
Junior Member
Thread Starter
Join Date: Feb 2014
Location: St. Louis, MO
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
UPDATE...
-cleaned the throttle body...it wanted to turn over but no luck...
-reset the inertia switch.... no luck
ordered a Fuel pump driver module, putting it in today...
-cleaned the throttle body...it wanted to turn over but no luck...
-reset the inertia switch.... no luck
ordered a Fuel pump driver module, putting it in today...
