Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

2004 F150 Supercrew Accel Vibration

Old 10-30-2015, 03:45 PM
  #1  
Member
Thread Starter
 
badincite's Avatar
 
Join Date: Oct 2015
Posts: 57
Received 2 Likes on 2 Posts
Default 2004 F150 Supercrew Accel Vibration

Just noticed this but when accelerating lightly a heavy vibration can be felt like your ruining over the lane departure vibration notifiers on the highways. As soon as I let of the gas it goes away, I was cruising at about 50 when I accelerated lightly when it did it. Is this a transmission issue, u-joints, or something else?
Old 10-30-2015, 03:51 PM
  #2  
ZSK
Senior Member
 
ZSK's Avatar
 
Join Date: Feb 2013
Location: Jacksonville, FL
Posts: 110
Received 19 Likes on 15 Posts

Default

Most likely a spark plug and/or coil on plug issue. I use a Bluetooth to OBDII adapter and the Torque Pro app on my phone to record misfires, allows me to figure out which cylinder is the culprit without having to just guess.
Old 10-30-2015, 03:56 PM
  #3  
Member
Thread Starter
 
badincite's Avatar
 
Join Date: Oct 2015
Posts: 57
Received 2 Likes on 2 Posts
Default

Originally Posted by ZSK
Most likely a spark plug and/or coil on plug issue. I use a Bluetooth to OBDII adapter and the Torque Pro app on my phone to record misfires, allows me to figure out which cylinder is the culprit without having to just guess.
Just had all the drivers side coils replaced the check engine is coming on because of the catalyst below threshold. Im guessing there clogged from the bad coils if i bust them out with that cause check engine codes? I just wanted to make sure it wasnt anything driveline related.
Old 10-30-2015, 07:03 PM
  #4  
Triton54HD
 
Triton54HD's Avatar
 
Join Date: Jun 2012
Location: Joliet, IL
Posts: 307
Received 26 Likes on 21 Posts
Default

driveline bump...have you lubed the splines on your driveshaft..?
Old 10-31-2015, 11:05 AM
  #5  
Member
Thread Starter
 
badincite's Avatar
 
Join Date: Oct 2015
Posts: 57
Received 2 Likes on 2 Posts
Default

Originally Posted by Triton54HD
driveline bump...have you lubed the splines on your driveshaft..?
Nah just bough the truck I will do that today. Also I have a whining noise coming from the front above 40mph when accelerating I'm wondering if that's related.
Old 10-31-2015, 11:46 AM
  #6  
Senior Member
 
primalurges's Avatar
 
Join Date: Mar 2009
Posts: 1,062
Received 49 Likes on 47 Posts

Default

Likely a coil. You can be getting a cat efficiency code because fuel isn't being burned and the cat sensor thinks the cat is the problem. The rumble strip sensation you're feeling is probably most prominent at 50-52mph?
Old 10-31-2015, 11:51 AM
  #7  
Mark
iTrader: (1)
 
techrep's Avatar
 
Join Date: Jan 2009
Location: Va. Beach, VA.
Posts: 36,848
Received 2,410 Likes on 2,111 Posts

Default

Milage on the motor ?? sounds like a Mis-fire condition... plugs need replaced with Motorcraft and do the springs and boots too...
Old 10-31-2015, 02:34 PM
  #8  
Member
Thread Starter
 
badincite's Avatar
 
Join Date: Oct 2015
Posts: 57
Received 2 Likes on 2 Posts
Default

Originally Posted by techrep
Milage on the motor ?? sounds like a Mis-fire condition... plugs need replaced with Motorcraft and do the springs and boots too...
174k they just replaced all the coils and plugs on the drivers side. Doesnt look like they did the passenger side guess i tackle that.



** Just placed a order for the removal tool if one breaks and new plugs and coils

Last edited by badincite; 10-31-2015 at 03:46 PM.
Old 10-31-2015, 06:51 PM
  #9  
Mark
iTrader: (1)
 
techrep's Avatar
 
Join Date: Jan 2009
Location: Va. Beach, VA.
Posts: 36,848
Received 2,410 Likes on 2,111 Posts

Default

dont forget the spark plug tool also...
Old 10-31-2015, 07:59 PM
  #10  
Member
Thread Starter
 
badincite's Avatar
 
Join Date: Oct 2015
Posts: 57
Received 2 Likes on 2 Posts
Default

Originally Posted by techrep
dont forget the spark plug tool also...
Order 1 with it off amazon

Thread Tools
Search this Thread
Quick Reply: 2004 F150 Supercrew Accel Vibration



All times are GMT -4. The time now is 03:13 AM.