Topic Sponsor
2004 - 2008 Ford F150 General discussion on the 2004 - 2008 Ford F150 truck.

2004 F150 with codes: P0171, P0174, P0191, P0301

Thread Tools
 
Search this Thread
 
Old 03-06-2009, 05:17 PM
  #1  
Junior Member
Thread Starter
 
SoldierKhakiman's Avatar
 
Join Date: Feb 2009
Location: Fort Hood, Texas
Posts: 19
Likes: 0
Received 0 Likes on 0 Posts
Default 2004 F150 with codes: P0171, P0174, P0191, P0301

I recently was driving from San Angelo, Texas to Fort Hood, Texas... about a 158mile drive. While driving, my 2004 F150 FX4 started to sputter and felt as if it wanted to shut off and the Emission System Light stays on. The slower i went the less that it would sputter if any. It usually started if I went up to 70mph. Occasionally it does it at lower mph. I took it to my local auto parts store and got a diagnostic. The codes came out as P0171, P0174, P0191, P0301.

Has anyone ever had this problem before or something very similar to this???
And if so what was done to correct it?
Any help would be greatly appreciated.

Thank you,
-Josh
Old 03-06-2009, 05:53 PM
  #2  
Senior Member
 
rollingthunder's Avatar
 
Join Date: Feb 2009
Location: Dakota City, NE
Posts: 786
Received 1 Like on 1 Post

Default

PO171= Lean Bank one
PO174= Lean Bank two
PO191= Fuel Rail Pressure Sensor Error
PO301= Cylinder one Misfire


Doesn't look good my man...
Old 03-06-2009, 09:00 PM
  #3  
Senior Member
 
jhunt47's Avatar
 
Join Date: Oct 2008
Location: arkansas
Posts: 1,402
Received 132 Likes on 79 Posts

Default

sounds like a fuel pressure problm would have this checked these were bad about the fuel pump going out
Old 03-07-2009, 10:31 PM
  #4  
Junior Member
 
Spoiled's Avatar
 
Join Date: Feb 2009
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Lean bank one/two could be the o2 sensor
FPRS or fuel pressure regulator could be bad
COP on cylinder one could be bad causing all the problems.

I would suggest changing that COP on cylinder one to another cylinder, reset the battery and then drive it. If you get codes go and have them pulled and if it changes to the other cylinder that you put the first COP on then you have a bad COP and change it and see if all your problems go away.



Quick Reply: 2004 F150 with codes: P0171, P0174, P0191, P0301



All times are GMT -4. The time now is 11:34 PM.