You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Removal and Installation
1 Remove the RH lower A-pillar trim panel.
2 Position aside the carpet below the blower motor.
3 Disconnect the blower motor electrical connector.
4 Remove the 3 blower motor screws.
5 Remove the blower motor.
Remove the blower motor wheel.
1 Remove the blower motor wheel clip.
2 Remove the blower motor wheel.
To install, reverse the removal procedure.
__________________ GATORB8 - 2006 Smokestone Scab Lariat 4x4 5.4 - Silverstar Ultra Heads/Fogs|AVS Ventvisors|Tint|Drop In Bedliner|PIAA Back-up Lamps|CIPA Tow Mirrors|ranchitout shifter cover|Wood Steering Wheel and Dash Kit|WeatherTech Floor Liners|Pioneer Premier TS-D720C|Peerless 10" XXLS|Qlogic Qcustom|Kenwood eXcelon KAC-X4R|Knukonceptz.com wiring|Escort QI45|MBRP Catback|Superchips Flashpaq|K&N Drop In|Optima Red Top|Tekonsha Brake Controller|2.5" AS Level/3" Rear Blocks|275/70R18 BF Goodrich All Terrain