2004-2008 Front only suspension lift???
#1
Member
Thread Starter
2004-2008 Front only suspension lift???
Fellow "screw-ers," here is my predicament; I have a 2.5" front level kit with AAL rear on RC 2.2 shocks. Great setup and functional but the rear rides about 1.5-2" higher with the AAL. It's nothing I can't live without, but is there a way to add another 2" to the front setup only? Would Fabtech or another company part out a system for just the front? I want to do that it right and not jeopardize any structural components or worry about driveshaft angles,etc. any thoughts?
#2
I would take that front level kit out and go with a complete 4" lift kit or you can get adjustable coilovers and add the spacer.
Are you a 2WD or 4WD?
Going the adjustable coilover and spacer route will more than likely change the angles on a few different things. You will also need to get new UCA.
JT
Are you a 2WD or 4WD?
Going the adjustable coilover and spacer route will more than likely change the angles on a few different things. You will also need to get new UCA.
JT
#3
Member
Thread Starter
I would take that front level kit out and go with a complete 4" lift kit or you can get adjustable coilovers and add the spacer. Are you a 2WD or 4WD? Going the adjustable coilover and spacer route will more than likely change the angles on a few different things. You will also need to get new UCA. JT
#4
Senior Member
The simple answer is no.
At 2.5" front level you are maxed out without a true lift kit. Some have gone to 3" but it puts a lot of strain on the front components.
At 2.5" front level you are maxed out without a true lift kit. Some have gone to 3" but it puts a lot of strain on the front components.
#5
Mark
iTrader: (1)
Why go with a 4" lift... Because it corrects the CV shaft angles that will prevent problems in the future.
#6
Member
Thread Starter
That was my main concern. Now I wonder if a company would sell just the front components, because my rear end is at the height I want. Time to make some phone calls. Thanks for the assist on this one.
#7
Mark
iTrader: (1)
You can buy new front drop spindles..
Trending Topics
#9
Mark
iTrader: (1)