2004 - 2008 F150 Mini H1 Projector Retrofit how-to
#112
Senior Member
Originally Posted by Summers22
Did you seal up the black rubber boot with silicone? I put some on the inside ring, then pushed it on, then filled the channel where the boot met the housing.
#114
Senior Member
Originally Posted by Summers22
Silicone the boot real well and inspect your o-rings on your truck connectors for the turn signal and the side marker.
#116
Senior Member
Originally Posted by Summers22
I ran silicone over the vents that had the fabric tape on them. Just smoothed some on with my finger.
#117
Senior Member
Found my leaks! Little bit of compressed air in the hole where the halo wires are going through, felt around the lens and I felt 3 places that air was coming out. Just siliconed it all over as well as all over the other light just in case. I left the holes in the back open for now so the rest of the dew can evaporate hopefully.
#119
Senior Member
Originally Posted by Summers22
Thats great news!