kennyf150lariat

if you have the owners manual.... it is on inside of the back portion of the nice manual zipper cover....it is the five digit number in bold black almost in the center of that sticker....mine was easy to locate....
thanks for the video though it is definately a different way to find the code if you dont have the owners manual...

SoCal

Hi, I already have my code but, How do u personalize or change my own code?
Do I need to take the back seat off to do so? I don't think i ever saw the "how to" in my owner's manual.
Thnx,
J.R

manual3

It says in manual how to change it

swimtexan

You need to punch in the old code, then press 1-2 and then set your new code. The doors should unlock symbolizing that the reset has been complete. The instructions are also in the manual.

swimtexan

You need to remove the backseat, which you can find instructions on how to do so on youtube. Then you need to pull back all the carpet that is protecting the back of the cab and it will reveal the factory reset code. Upon finding this code you need to punch it into the keypad, press 1-2, and then create a new 5 digit code. The doors should unlock, and your new code will now work.

Always make sure that you keep a card with the factory reset code in your manual, in the event that you would like to change the code again.

chibbert

I struggled to get my rear seat off until I went and actually bough a large 12" screwdriver like the video said. That fixed everything. So happy to have found these instructions and video.

swimtexan

In case anybody was wondering, here is the link to the "HOW TO" on back seat removal.

https://www.f150forum.com/f74/f150-r...-my-way-16129/

Nola 07 FX4

Video was great! I found this thread last week and I ended up doing it this past weekend. I had to go out and buy a t40 and t50 bit though. Once I had it all I went outside and had the video brought up on my phone and I had to watch a few parts a couple times but it wasn't hard at all. The hardest part was putting the backseat back on, I had to get it lined up but it really wasn't hard.

Thanks for making the video!

USC529

thanks for all the good comments glad i could help. i like doing videos so if anybody has something they want to know how to do let me know and ill try and figure it out and do a video on it thanks

Class126

Perfect...awesome vid!!!! just what i needed!!!!