jhughes2013

Finally got pics up. Here's another!

06Screw4X4

Newest pic. Next week Panama City! Bike Week!!! woot woot

Ranger2F150

Looks like the '06 I wanted to buy and ended up with a red '07 FX 2 sport.
The wife saw the front end of '07 and said you better come look at this one.

Larryw1

Just Love to post my pics! I have put a lot of work into my Truck. So much fun...

These trucks look so good. Black, Blue, Silver, Etc.
Light kits, tires and wheels, Grills, Leveled, lifted Etc .. Etc.

PawPaw's truck: Just the right touch
leveled with 35" Magnaflow exhaust -programmer, Bilstein shocks. Etc.

06Screw4x4: Leveled nice wheels and tires, Nice Light bar

danielfjr81 - 8" Rise 37" on 22's Exhaust , intake Etc.

So many trucks to mention ... Each truck has its' own look.

Your trucks give out Idea's to the people who drive and Love their F150's

Keep posting and sharing the Pics.

06 screw

Heres my 06 Lariat Screw...love it. Just got the Bilstein 5100's installed to level the front out, and threw on some Nitto Terra Grapplers, 275/70/18. The nose is about a half inch higher than the rear now though...what do yall think, look ok? Need rear blocks? Rear add a leaf?

06Screw4X4

Thanks Larry...like your truck too!
Screw, mine is about 1/2" high too...about to fix that here in a minute. I love having a fab shop!

06 screw

You just gunna fab up some 1" rear blocks?

Larryw1

Since the truck comes stock with 2" blocks you need to rplace with 2 1/2"
block or use a 3" but then you will be 1/2" high int he rear
1/2" high in the rear is better than 1/2 high in the frt. Do you pull a trailer?
when I added the AAL my truck was 2" higher than it was after the lift - in the rear

Stock rear block 2"
AAl adds 2"
don't stack the blocks mine were stacked when I first did my 6" lift (2" & 3" = 5" total) they kept coming loose.
I changed to a fabtech 5" block & I put in the AAL for another 2" this totaled 5" added to the stock height in the rear.
It took all that height to level after the 6" in frt with the Bilstein 5100 frt struts.

06 screw

Mine is actually a 4X2, so i dont think it has any blocks in the rear, not that I can tell anyway, so I need to get my hands on some 1"ers...thanks

Larryw1

Well being only experianced with my truck a 4x4 ... I stand corrected.

1" is simple since you have your own fab shop. You do have the two pins though?
The ones from the springs that go into the plate welded on the diff.
Or is that different too?