-12 wheels with true 33x12.50's?
#1
-12 wheels with true 33x12.50's?
05 king ranch 4x4 with king coilovers and camburg uca. Lookjng at the 18x10 -12 fuel trophys or some 18x9 -12 fuels either way will be going with toyo 33x12.50r18s. Question is...anyone running these on a level? Shocks gave me about 2.5" or so of level. I dont want to cut anything at all if possible so please let me know what u guys are running and if they rub? Thanks guys ahead of time!
#5
Senior Member
I'm planning to run the same setup when i buy new tires and wheels and I have researched as much as I can... What I have come up with is there are a couple factors that come into play and it basically boils down to how aggressive the sidewall is on the tire and the fact that every truck is going to sit a little different. With that being said, with a true 2.5" level, you should be good. I would say if you do have to trim it would be extremely minor but without the tires and wheels on the truck, you may not be able to get a true answer....
Like I said, I have a 2" level and I plan to run this setup and if i have to do minor fender well trimming, so be it.
I do have a buddy that has a 2010 fx4 on stock suspension that runs this setup and had to do ZERO trimming at all. No rubbing, No noises, all golden for him...
Like I said, I have a 2" level and I plan to run this setup and if i have to do minor fender well trimming, so be it.
I do have a buddy that has a 2010 fx4 on stock suspension that runs this setup and had to do ZERO trimming at all. No rubbing, No noises, all golden for him...
#7
Senior Member
Im going to purchase Helo HE879 in 20x9 w/ -12 offset and i plan on running 33x12.50x20 federal couragias with them.
Should stick out of the wheel well about 1.5-2" and have the wide aggressive stance with maybe only minor trimming... We will see lol
Should stick out of the wheel well about 1.5-2" and have the wide aggressive stance with maybe only minor trimming... We will see lol
Trending Topics
#9
Senior Member
Pretty certain a -24 will rub. I had 17x10 with a -24 and 315/70/17s and there wasn't a chance in hell they would fit without major trimming. I did clear the 315's with factory wheels and 1.5 wheel spacers. I had to trim for 17x8 with a -6 and 4.25 backspace running 35x12.5x17 Federals.