alter43

Hey guys I bought a sub box for my 06 F150 for under the seat with downfire, I tried to put it in but it doesn't seem to go in place. What all do I need to remove to get it to fit? Of course I removed the jack and stock sub but what else?! What am I missing?! Thanks guys! And I'm 100% the box fits so please don't ask!

NamedHerOksana

When I put mine in, I actually had to put the seat up to squeeze it in.
I know it's not much but just a tip. Other than that it should just slide ride in, maybe with a bit of force.
Best of luck to ya.

alter43

what do you mean? All the way up or angle it?

NamedHerOksana

I had to put mine all the way up and then slowly lower it as I pushed it in

alter43

did you do it by yourself or with another person? I do that but when I get one side in the other side sticks out

NamedHerOksana

I had to put mine all the way up and then slowly lower it as I pushed it in

NamedHerOksana

I did it alone. I put both seats up then put the sub in as far as I could then got inside and slowly lowered the seats as I pushed it in from the middle. mine doesn't fit perfect, it does stick out a bit but it's just the slightest bit.

KingRanch4Life

iTrader: (2)

Damn... Didnt think you'd have enough airspace for 2 twelves..

Lift the seats up.. Slide the box till it touches the bottom of seat.. Let the seat down so they are not fully down or latched in the upward position.. Slide box it further.. This is what i have to do with my foxbox...

alter43

I'll try that

alter43

thanks man, I'll try it again, I just feel like I'm doing something wrong, jack, sub, anything else?