keys6505

I had another thread on here that died out, so im trying again..

Truck runs like crap, blows oil smoke, excessive crankcase vacuum.. Thought it may have been PCV, but I scanned it again and it came up with 12 codes..

P0354 coil D circuit malfunction
P0010 "A" camshaft position sensor circuit (bank 1)
P0174 system too lean (bank 2)
P0201 Injector circuit malfunction cyl 1
P0202 Injector circuit malfunction cyl 2
P0351 coil A circuit malfunction
P0356 coil F circuit malfunction
P0357 coil G circuit malfunction
P0358 coil H circuit malfunction
P0606 PCM processor fault
P2195 O2 stuck lean
P2197 O2 stuck lean

I don't even know where to go from here. Seems way to random for me to make any sense of it. Also want to note the battery was dead and needed a jump if that matters, but I don't see how it could.

Any help would be GREATLY appreciated!!

Heres my old thread if anyone wants the backstory: https://www.f150forum.com/f4/truck-m...-stall-149428/

huffy47

set fire too it and say you don't know what happened lol jk idk man a stealership might provide insight

papa tiger

You have written down the codes, erase them, reset the puter by unhooking the battery for 15 minutes. Run it for about 30 miles and restart it running to the store a few times, then retake the codes if any, these are your problem. Look for a vacuum leak at hoses while resetting the puter. Make sure all vacuum systems are working correctly. Things like the heater can have a vacuum leak in its controler for the doors. Check the air intake to make sure you have good air tight connections and no crack in the tube. Clean your Maf with approved spray. The oil smoke sounds like cooked pistons/rings, run a compression test and a vacuum test to find mechanical condition of the motor. You may/probably need a Jasper swap. A bad PCV valve, and its hose seperates internally can create a real oil burner situation, make sure it is in good condition before you spend a lot of bucks chasing the smoke.

Adrenalineaudio0909

just at glance that looks like pcm

primalurges

Try to find a PCM to swap. Those codes seem very random and it unlikely that you can have so many things go wrong at once. How many miles on the truck and is there any special event that may have lead up to the problem like flooding, fire, or accident?

Swegner99

I know exactly what you need!
.
.
.
.
.
.
.
.
.
.
A salesman....

J/k, But seriously at this point in the game I would get it into a dealership and let them battle it out. Sounds like it could have multiple issues.