09 mirrors on an 05 question
#1
Senior Member
Thread Starter
09 mirrors on an 05 question
So I found a set of 09 mirrors with signals and my truck is an 05 XLT without signals. What pins would I need to switch if the signals don't work? I've searched this but couldn't exactly find what I was looking for, also if they are heated will the heated portion work if I only have manual controls and no climate control?
#2
Senior Member
Thread Starter
So I picked up the mirrors don't think they're heated but they are power with signals brand new in the box for $80 so I just need to figure out which pins for the signals will need to be switched if the signals don't work. I anyone knows which pins to switch around please let me know
Thanks
Thanks
#4
Senior Member
If I recall our mirror harnesses have 2 grounds and the 09's have one. You need to eliminate one of our grounds and match the other one to the ground on the 09 harness. Hope that helps a little.
#5
Senior Member
Thread Starter
Got it all figured out thanks, moved the ground wire from slot #2 to slot #8 on the drivers side then both signals worked.
#6
Senior Member
You should have went with tow mirrors!
#7
Senior Member
Thread Starter