07 power steerin pump replacement
03-15-2016, 11:48 AM
#11
The following users liked this post:
650NutKase (03-15-2016)
03-16-2016, 11:01 AM
#12
Senior Member
You'll have to use a pulley removal tool, then the easiest way for me was get underneath it and there will be 3 or 4 bolts depending on manufacture date holding it in place. If you have 4, one is really hard to get too and when you're putting the new pump in, you don't need to put it back in (newer trucks still have the hole for it but not the fourth bolt anymore)
03-16-2016, 11:03 AM
#13
You can get the pump off without removing the pulley if you want or need to. I had to do that with mine. The pulley refused to come off, even when the entire pump was off and I had it benched.
03-17-2016, 04:49 AM
#14
You'll have to use a pulley removal tool, then the easiest way for me was get underneath it and there will be 3 or 4 bolts depending on manufacture date holding it in place. If you have 4, one is really hard to get too and when you're putting the new pump in, you don't need to put it back in (newer trucks still have the hole for it but not the fourth bolt anymore)
03-17-2016, 07:35 AM
#15
God no, it's way easier than that. Just take off the shroud and the fan and lean in there.
03-17-2016, 08:46 AM
#16
