04-05 raptor style foglights?
#121
Senior Member
I bought 4 QuadFire lights and using the stock supporting brackets (horizontal fog lights)
I mounted the lights in such way so the tip of the corner didn't sit past the bumper edge. I used thick L plates from a local big chain home improvement store. And spray painted those black.
Took some thought, but as you can see it turned out perfect.
#123
Senior Member
I wired them up to two separate switches, as my truck did not come with fog-lights, I bought a new bumper with brackets. But I found a spot to mount them, I will take pictures of the way I mounted the lights as well as switch locations tomorrow.
The following users liked this post:
044x4F150 (05-24-2016)
#124
Have been working on this forever. Tried finding "L" brackets but couldn't find any that would work. So I tried taking apart the lens to fit in there, and couldn't get those apart. So finally I decided to do it this way (I'll post a picture) which I ran across on another forum. A friend of mine is making the brackets for me and they're almost done. Other photo is from the test fit before I sent them back to him for drilling.
The following users liked this post:
Thompson11A (05-27-2016)
#127
Senior Member
Two L brackets with a thick bolt holding them onto the stock foglight housing.
You can see (very poorly) the back side two L brackets, with a slight s connecting the two L brackets together.
Apologies I did not have time to take these off to show, just too busy at the moment. I will show better images in the next day or two. Showing exactly how I mounted these.
Bottom back side
#128
Two L brackets with a thick bolt holding them onto the stock foglight housing. You can see (very poorly) the back side two L brackets, with a slight s connecting the two L brackets together. Apologies I did not have time to take these off to show, just too busy at the moment. I will show better images in the next day or two. Showing exactly how I mounted these. Bottom back side
#129
Senior Member
I'll get my dimensions off the housing later this evening after work. I toyed with this myself for days until you see what I've done. I'll get back to you on this.
#130
Attachment 265382
Those are the actual holes for the fog light hosing. I got a bracket that's about 3 inches long coming straight down and then it has a 90 degree turn facing forward that's about an inch long.
Those are the actual holes for the fog light hosing. I got a bracket that's about 3 inches long coming straight down and then it has a 90 degree turn facing forward that's about an inch long.