winshield washer spray adjustment?
#1
in the house
Thread Starter
winshield washer spray adjustment?
I suppose this is in the Owner's Manual but...does anyone know how to adjust the spray for the windshield washers? Mine have always tended to hit a bit 'high' on the windshield even with the vehicle at rest, a problem exacerbated when moving down the highway.
Thanks in advance!
Thanks in advance!
#3
in the house
Thread Starter
Cool...I'll go try that. That is what I've had to do on others, but the Ford's seem to be more 'fixed in place'.
#4
Just another member
Ok good luck. I don't know if that will work on our trucks, I just heard some guy mention it (we know it works on some vehicles of course). Let us know how you make out. Thanks
#5
Member
Bumping rather than starting a new thread...Mine passenger side nozzle sprays almost entirely off the windshield to the side and is also too spraying too high. Did the pin adjustment work? I tried turning the housings with my fingers to no avail and was leery of using a pin/needle to pry on the nozzle jet.
Any advice for adjusting the spray of the windshield washer?
Any advice for adjusting the spray of the windshield washer?
#6
Bumping rather than starting a new thread...Mine passenger side nozzle sprays almost entirely off the windshield to the side and is also too spraying too high. Did the pin adjustment work? I tried turning the housings with my fingers to no avail and was leery of using a pin/needle to pry on the nozzle jet.
Any advice for adjusting the spray of the windshield washer?
Any advice for adjusting the spray of the windshield washer?
Basically a bump: My passenger side needs to be moved and of course its not possible. I'm thinking of taking a small needle file and morph the slot.
My Dealer replaced the original and got zero improvement.
Anyone have a better solution?