smithers12

Hello, new to the forum here and I have a few questions.

I am installing an aftermarket stereo with amps. I have just the sync standard and NOT the nav unit or the sony upgrade.

I don't believe there are rca outputs in these stock units, so what do I need? PUTTING IN 2 10'S WITH SOME 5X7'S IN THE DOORS. Just looking for what I need in terms of rcas from the head unit etc.

I already have the jl ssi and cleansweep for oem integration. Do I STILL need the PAC-AOEM for rcas?

I really don't want to cut into factory wires if I don't have to
Plug and play is the best option for me. It is a 2014 by the way al though I don't think that matters.

thanks for any help

smithers12

bump.............................................

Nobman

Get a hi level input amp. You keep the stock head unit and take the speaker wires stright to the amp.

smithers12

I have a clean sweep and ssi for keeping the stock unit. Don't the head unit wires go into the ssi?, which goes into the clean sweep?, and goes from the clean sweep to the amps via rca cables?

torinalth

technically you take the speaker level inputs and run it to the SSI. not having the sony system I do not think that you have the amp, so you should be able to take it from behind the HU but from what I've read if you have the 4.2" screen then you have a different plug and I can't really help there. the safe way is to take the front stage and take the lead directly from the wires going to the speakes and connect it to the SSI. SSI to clean sweep. CS to amp, then amp to new speakers.

smithers12

thanks for the reply

Schrec1992

Try this it says 04-08 but it will work on newer I have it in my 2011 with sync and Bluetooth

http://www.sonicelectronix.com/item_...OEM-FRD24.html