What are you using for reverse lights?
04-01-2016, 08:01 AM
#1
Crotchety Old Man
Thread Starter
What are you using for reverse lights?
Just curious to what people are running for reverse lights, and how they like them? Particularly IN the factory housing.
I popped in superbrightleds.com WLED-W19-T bulbs for my reverse bulbs. They have 4 led facing rear and then I dunno 12 or something mounted radially.
Can't really tell if they are any brighter than stock, so I am curious to what other people are running so I may upgrade in the future.
What kind of current can the reverse light circuit take?
*Also* any way to program the BCM to adjust the flashing back to stock? I ran a digital flasher on my Ranger, but these damn software run F-series thwart me at every turn it seems.
https://www.superbrightleds.com/more...ofit-car/1563/
Staff edit:
There is additional discussion located here.
I popped in superbrightleds.com WLED-W19-T bulbs for my reverse bulbs. They have 4 led facing rear and then I dunno 12 or something mounted radially.
Can't really tell if they are any brighter than stock, so I am curious to what other people are running so I may upgrade in the future.
What kind of current can the reverse light circuit take?
*Also* any way to program the BCM to adjust the flashing back to stock? I ran a digital flasher on my Ranger, but these damn software run F-series thwart me at every turn it seems.
https://www.superbrightleds.com/more...ofit-car/1563/
Staff edit:
There is additional discussion located here.
Last edited by Martian; 10-07-2016 at 01:14 PM.
04-01-2016, 09:50 PM
#2
Senior Member
Wired in a set of these from my 7 pin plug.
04-01-2016, 11:36 PM
#3
Senior Member
04-02-2016, 05:59 AM
#4
These Video Link: http://www.amazon.com/Auxbeam-waterproof-Off-road-Auxiliary-Driving/dp/B00LX2D94I?ie=UTF8&psc=1&redirect=true&ref_=oh_aui _detailpage_o03_s00 And these Video Link: http://www.amazon.com/Package-Interior-Reverse-Lights-pieces/dp/B00H8DFKS4?ie=UTF8&psc=1&redirect=true&ref_=oh_aui _search_detailpage
04-02-2016, 09:51 AM
#6
King Hater
I currently have LED bulbs installed in my Taillights. While its better than stock, they still dont put out enough light.
I plan on cutting holes in my rear bumper and installing some square LED lights. There have been a few threads posted on this. Its the cleanest install I've seen.
I plan on cutting holes in my rear bumper and installing some square LED lights. There have been a few threads posted on this. Its the cleanest install I've seen.
The following 5 users liked this post by fseries54303:
a_cmc_2b (09-28-2016),
catman3516 (05-22-2016),
Chris Ruff (04-12-2016),
Tell (06-12-2016),
willrite (05-16-2016)
Trending Topics
04-02-2016, 10:37 AM
#8
921S 30 watts.
The following users liked this post:
Trigger 13 (04-23-2016)
04-02-2016, 10:53 AM
#9
American member
For just installing a bulb...The Phillips LED's are damn good! They actually shine light instead of just being bright.
My camera looks as if it's daytime.
My camera looks as if it's daytime.
Last edited by Masi1926; 08-06-2019 at 01:52 PM.
The following 4 users liked this post by Masi1926:
04-02-2016, 12:06 PM
#10
Senior Member
I actually just bought this
and installed it in the top holes of my license plate. Its wired into the 7 pin connector. I was going to do the under the bumper lights but my dual exhaust is in the way. I figured for $19 and free Prime shipping I couldn't go wrong. Its extremely bright. Only real negatives I read about is some people saying that moisture got in theirs, so I siliconed where the wires come out and around the lens. Works great because I had trouble seeing and I have no camera.
