BrackFX4

hey guys just bought the new truck and am looking for a black uws/weatherguard lo-pro box for the back. Looked on the forum for actual sizing help and found nothing. I am looking on amazon and think their fitment guide is a pile of crap. measured between the rails on the truck and it 62".

Anybody have this box? will it fit. says its 60"


Any idea if the measurement taken is on the top (rail to rail) or at the base of the box (inside rail to inside rail)

Any help is appreciated and if their is a forum i didnt see on this please post it cause i couldnt find it.

Thanks so much

p.s all local shops ive talked to have been absolutely useless

HoustonRider

60" overall. on that box. The "inner" box drop down is only 52" across.

http://www.industrialproducts.com/UW...ws-low-blk.htm

BrackFX4

Houston Rider you are a beauty thx alot for the quick response never found that chart.

BrackFX4

according to the chart this is the one that fits. just have to double check it will clear the wheel well. Anybody have the uws can u attach it with a j type hook under the rail or do you have to drill through the plastic bed rail cap and into the side rail?

GatorMedic

Both Weatherguard low-profile and their full-size saddle boxes will fit on a 5.5' bed 09+ F150. When I was shopping, everyone had a different answer to which ones would fit. But I have had both sitting on my truck (comparing them before I made my decision to buy the low-profile), so I can assure you they do fit. You can click on my profile to see some pics of mine