Tire and Wheel Fitment Guide - 2009 and newer
02-25-2017, 05:43 PM
#5062
Good catch... thanks. I must have looked up 60's by mistake.
I felt the same way about 275-70-18. Quite a few people told me the largest I could go would be 275-70-18. Although they were considerably larger than my stock 265-60-18 tires, they looked way too small with a 2.5 level
I felt the same way about 275-70-18. Quite a few people told me the largest I could go would be 275-70-18. Although they were considerably larger than my stock 265-60-18 tires, they looked way too small with a 2.5 level
02-26-2017, 10:22 PM
#5063
Junior Member
Join Date: Feb 2017
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Hows it going everyone? I am looking to get new tires and wheels for my 2013 FX4.
Currently it has:
Factory Black 20x8 44 Offset Wheels
275/65/20 Tires
I am looking specifically at:
35/12.5R17 BFG KO2 Tires
17x8.5 0 Offset 4.75" Backspacing
I am also going to install a 2.5" AS Leveling Kit when I put them on.
Just curious to see if anyone runs this same setup and how far out it sticks out and if it will work fine?
Currently it has:
Factory Black 20x8 44 Offset Wheels
275/65/20 Tires
I am looking specifically at:
35/12.5R17 BFG KO2 Tires
17x8.5 0 Offset 4.75" Backspacing
I am also going to install a 2.5" AS Leveling Kit when I put them on.
Just curious to see if anyone runs this same setup and how far out it sticks out and if it will work fine?
02-27-2017, 01:26 PM
#5064
Senior Member
Figured i would post this here.
If you want to run the stock 2017 Raptor wheels with wheel adaptors, you need a min of 1.5 spacers. the indent between wheel stud holes is not as Deep as the 2012-14 non beadlock raptor wheels
If you want to run the stock 2017 Raptor wheels with wheel adaptors, you need a min of 1.5 spacers. the indent between wheel stud holes is not as Deep as the 2012-14 non beadlock raptor wheels
03-07-2017, 05:45 PM
#5065
I have a 13 fx4 extended cab and would like to put 18x9 Helo Maxx ,+10 OS, and run probably 285/70/18s on them. I have a 1.5" level kit in front, nothing in back. In short, will this set up fit. I looked through the 500+ pages and couldn't find anything with 1.5 leveling. Thanks for any help.
03-11-2017, 03:28 PM
#5066
Crotchety Old Man
When I switch my truck to personal use in the next year or so, I want to run a large 33" tire I think your 34s measure 33.5 right? Thats the size I want to go with, nice and skinny too, but I really dont want to drop the money on a regear. At the same time a 255/80/17 will look too small on a level most likely.
03-12-2017, 03:33 PM
#5067
03-13-2017, 12:36 AM
#5068
Senior Member
No problems at all man, they've been great. I'll have to see if I have any front or rear pics if not ill take some for ya
03-13-2017, 12:45 AM
#5069
Senior Member
03-13-2017, 12:47 AM
#5070
Senior Member
What gears are you running? If stock, did you notice a big difference with these?
When I switch my truck to personal use in the next year or so, I want to run a large 33" tire I think your 34s measure 33.5 right? Thats the size I want to go with, nice and skinny too, but I really dont want to drop the money on a regear. At the same time a 255/80/17 will look too small on a level most likely.
When I switch my truck to personal use in the next year or so, I want to run a large 33" tire I think your 34s measure 33.5 right? Thats the size I want to go with, nice and skinny too, but I really dont want to drop the money on a regear. At the same time a 255/80/17 will look too small on a level most likely.
I can still break the tires loose