Tire and Wheel Fitment Guide - 2009 and newer
#4801
18x9 Ballistic Anvils 0 offset
Slight rub on the front inside inner fender in reverse at full lock. Slight trimming which doesn't bother me. Not sure why it's mentioned so much. Love the look, plan to add some smaller flares, not a fan of the big bolt on look.
#4803
Just used them on 5/14/16. Good price, free delivery deal but the install kit did not arrive. 9 days later I've received my wheels but can't do anything with them as I'm still waiting for the install kit.
Communication on their part has been lacking.
Communication on their part has been lacking.
#4804
Senior Member
305/50R20 Toyo Proxes STII
I installed 305/50R20 Toyo Proxes STII on my stock height 2012 FX4. They fit great with no rubbing. The closest area to watch was the upper control arm and the clearance was just shy of 1/2" between the inside of the tire and the UCA.
Since then I added a 2" Leveling kit from F150lifts.com.
#4807
Hello, I have been searching through this forum since this morning, and havent been able to find definite answers. I have a 2014 fx4 screw with 2" leveling kit. I am looking at getting 305/70/R18 tires (35x12.01x18) will they fit and will i have any rubbing issues?
#4808
Highwayman 2020
Just swapped out stock P265/70R17 for Duratrac 285/70R17 onto stock rims.
No level kit or lifts. Fits just fine, even with thick mud flaps.
Mileage of course suffered, but so much better in sand and mud, even w/o airing down.
No level kit or lifts. Fits just fine, even with thick mud flaps.
Mileage of course suffered, but so much better in sand and mud, even w/o airing down.
Last edited by solodriver13; 05-31-2016 at 02:51 PM.
#4809
New Shoes!
^BEFORE
^AFTER
2012 SCREW
Tires: Goodyear Duratracs 285/70-17
Wheels: American Outlaw Marshal (gunmetal) 17x9 +18 Offset.
Other changes: Bilstein 5100 with fronts set at 3rd from tallest (can't remember actual height...somewhere around 1.5" or 1.75") Flowmaster American Outlaw Series catback with dual side exit.
Last edited by GearHead84; 06-02-2016 at 09:10 AM.
The following users liked this post:
clarkbre (06-02-2016)