Tire and Wheel Fitment Guide - 2009 and newer
#2751
Junior Member
Join Date: Jan 2012
Location: Kailua, Hawaii
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
The following users liked this post:
Joel_980 (12-01-2013)
#2753
Member
#2754
Here's mine. 2012 FX2. Bilstein 5100 series leveling shocks in the front and 5100s in rear. Fuel Trophy 20x9 5in bs +1 offset. 295/55r20 Toyo Open Country AT2s. Had to trim just a notch of the lower valance on the backside. Emblems are now blacked out.. just gotta take new pics.
Last edited by tbgreen89; 12-02-2013 at 02:34 AM.
#2755
Senior Member
Been searching like a crazy man... is anyone running 18x10's with -12 offset and 5" backspacing?
Im looking at a set of Fuel Trophy's wrapped in 295/70R18. Im not afriad to trim or beat back a pinch weld. More interested in how far they're going to stick out. From my math I dont think they will stick out much more than a 18x9 -12 4.5. Like .5" more. Any word on them hitting the upper/lower? Truck will have a 2.5" fox lift
Would I be better off running the 17x8.5 with 6 offset and 5 backspace? I do want them to stick out more than stock. 1-2" is fine. Any input?
Sizes: http://www.mhtwheels.com/cms_pdf/D551-552%20Trophy4.pdf
Im looking at a set of Fuel Trophy's wrapped in 295/70R18. Im not afriad to trim or beat back a pinch weld. More interested in how far they're going to stick out. From my math I dont think they will stick out much more than a 18x9 -12 4.5. Like .5" more. Any word on them hitting the upper/lower? Truck will have a 2.5" fox lift
Would I be better off running the 17x8.5 with 6 offset and 5 backspace? I do want them to stick out more than stock. 1-2" is fine. Any input?
Sizes: http://www.mhtwheels.com/cms_pdf/D551-552%20Trophy4.pdf
Last edited by Krookz; 12-02-2013 at 02:06 PM.
#2756
Not a very good pic.. showing off my blacked out emblems.. but here's how far They stick out. Looks better in person but I like them to stick out a bit.
Last edited by tbgreen89; 12-02-2013 at 02:28 PM.
#2758
Got tires and wheels installed today on my 2013 scab 4x4 5.0. Tires are Goodyear Duratracks 315/70/17 on VTech Raptor 17x8 +25 offset. Had to trim the bumber valance other wise they fit great. Totally changed the look off the truck.
#2759
Junior Member
Join Date: Dec 2013
Location: Southern CO
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Here's my 2011, 1" level, Nitto 295/70-18, stock wheels
Just put these on last week. Trimmed a little rubber from the fender splash and no rub lock to lock, and articulated on a driveway. Previously had BFG AT KOs 285/65-18.
These Nittos are just over 34" tall and nearly 12" wide.
These Nittos are just over 34" tall and nearly 12" wide.