Tire and Wheel Fitment Guide - 2009 and newer
11-08-2013, 09:50 AM
#2711
Junior Member
Join Date: Nov 2013
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
OH sheet... supercrew / supercab i should pay more attention... any pics of the supercab? just thinking outloud do you have the TPMS... dont even know if mine have those...guess i could let the air out to find out
11-08-2013, 10:03 AM
#2712
Junior Member
BTW your truck looks sic.... i see you have two trucks listed at bottom which one is pictured?... do you know the back spacing of either/both of theses wheels ? any side pics so i could see how much they stick out.. and you had no problems with th +15mm 18x9 wheels ????The black truck has 18x9 +20 and LT295/70R18 nitto trail grapplers. Very minor rub (mainly when backing up and a sharp turn). Here is a pic of both trucks in the garage for a look at how far the tires stick out.
Hope that helps a little.
11-08-2013, 10:34 AM
#2714
To not have the TPMS warning light to come on you need to have a TPMS sensor in your wheel. If you just put a new tire on a stock wheel you are fine. If you put on an aftermarket wheel you need to install a stock TPMS or an aftermarket one.
11-08-2013, 10:41 AM
#2715
Junior Member
Yes speedo was off a little bit on both. I have a tuner on the white truck and that has brought it back to close to stock. As far as the TPMS sensors go, I had new sensors put in when I got the new tires and rims and have not had a problem with them at all.
11-12-2013, 03:24 PM
#2717
I have a 2013 xlt 4x4 off road and i want to put the federal couragia tires on it oh so badly. Problem is that my 18in wheels are 18x7.5. Im wondering if i can fit a 35x12.5 20 tire on my truck with a 2.5 in. level once i get a wheel that can fit it. I am looking at the American outlaw bunkers that are 20x9 with a +18mm offset. Also if i can only fit a 33 is it safe or still ok to run that tire on the 20x9 if it says its minimum is 9.5 wheel width
Last edited by munster113; 11-12-2013 at 03:28 PM.
11-13-2013, 10:01 AM
#2718
raptor wheels off of a 2012
315/70/17 Goodyear Duratrac tires
Front level kit only as far as suspension mods
I did have to trim the front plastic valence a little and the rear/bottom of the fender flares
315/70/17 Goodyear Duratrac tires
Front level kit only as far as suspension mods
I did have to trim the front plastic valence a little and the rear/bottom of the fender flares
The following users liked this post:
2003_lightning (12-10-2013)
11-14-2013, 11:00 AM
#2719
Let me add my .02 here, and ask for help at the same time.
'13 Scab STX with stock 18"
I want to increase my contact patch and go with a 20 or 22 X 9 or 10.
I want more wheel and a bit less tire. Take up more space in the well.
I DO NOT want to have the tires and wheels stick out at all. I don't want the "BALLER" look.
Had this thread been less than 272 pages i'd keep reading, so if this is redundant, I am sorry.
I had initially wanted to get the newer FX2/4 wheels to stay with a ford wheel but i'd prefer a laced wheel in grey, thats pretty much a unicorn, a fictional item.
'13 Scab STX with stock 18"
I want to increase my contact patch and go with a 20 or 22 X 9 or 10.
I want more wheel and a bit less tire. Take up more space in the well.
I DO NOT want to have the tires and wheels stick out at all. I don't want the "BALLER" look.
Had this thread been less than 272 pages i'd keep reading, so if this is redundant, I am sorry.
I had initially wanted to get the newer FX2/4 wheels to stay with a ford wheel but i'd prefer a laced wheel in grey, thats pretty much a unicorn, a fictional item.
11-14-2013, 12:04 PM
#2720
