flamehead16

Before 1.25 spacers


After

tkhuang

Can I run 1" on my FX2 with 275/65/20 without trimming studs? the wheels are the stock black 20" FX wheels

flamehead16

smalles you can run on 20'' stock wheels is 1.25. any smaller and you will have to cut. the 17'' raptor and 20'' fx4 have a indent in the wheel letting the excess stud go into the wheel without hitting.

Jdude

Can u still use your spare with 1.25" or do you have to use 1.50" for that to work??

JJM

So what you're saying is 1" will work on 20" fx4 wheels.

JustAkid

I have 1'' on the newer style fx4 wheels. As said above the wheels have indents if you will for the stock studs to go into because the stock studs are longer then 1''

1 inch wheel spacers with 35x12.50r20 tires

poor6737

I did some digging through the posts but man that's a ton of pages! I'm currently running 35x12.5R17 Nitto's with a 2.5" RC lift and have no rubbing. I want to pick up some BORA 2" spacers and add some fender flares, but I don't know how much, if any, trimming I'll need to do. Anyone running the same thing? Picture of the truck as it sits now.

smgfx4

I ran 33x12.50 with 1.5 spacers and it rubbed some. 35's and 2" spacers will probably require a bunch of trimming in the rear of the front fenders

Brett2013fx4

Fx4 18s with 305/70/18 kanati mud hogs withe 2" spacers

Brett2013fx4

I didn't have to trim too much to fit mine but I did trim extra for when I go mudding/wheeling