Spong

First off, I did some searching and couldn't find an answer.

I'm wanting to get one or two spare keys for my truck. I always like to have multiple keys for my vehicles. I know with my other Fords, I was able to buy key blanks from Ebay, get them cut for a couple $$ at the hardware store and then I programmed them to the vehicle. The truck is different though since it's the keyfob combo key.

I'm wondering if I can just buy a couple regular Ford keys (non keyfob style) and program them to work?

Thanks,
Steve

NastyFFX4

iTrader: (1)

You can always use a standard key but it will only open the door, not start the vehicle. However I have no idea if you can use a previous generation chipped key, don't believe so. Our keys aren't cheap either. Be prepared to spend $120 on the cheap online!

s_vares

Any of those basic 90 bit 10$ keys will work if you dont need remote head.

stevebass4

I did the flip key mod and I believe you can have up to six keys coded to your truck - ie open the doors and start the truck


got the flip keys from ebay for about $25.00 each and had them cut at Homedepot


need to program ALL the keys when you do this


Insert Admin Key 1: Turn to On, Turn to Off. Remove Key.
Insert Key 2: Turn to On, Turn to Off. Remove Key.
Insert New Key: Turn to On. Wait a few Seconds. Turn to Off. Remove Key.


from Rider


https://www.f150forum.com/f38/key-up...roject-154482/

Spong

Thanks for the replies!

So keys like this would work?
http://www.ebay.com/itm/2-New-Uncut-...6a8c3d&vxp=mtr

stevebass4

yup you'll still need to program them as mentioned above with ALL your keys then you should be good to go

NastyFFX4

iTrader: (1)

Good to know. Guessing you meant 80 bit.

Spong

Excellent! Thanks everyone!

Spong

New keys arrived today. I had them cut at Ace hardware then programmed them at home. They work excellent!

Keys: $13.99
Cutting: $2.00

Total Investment: $16!

RaptorDrvr

I'm definitely gonna give this a try...thanks for posting it!