Show off your "09 - Present" FX4
#6261
https://www.amazon.com/Knifeless-Fin...Knifeless+tape
If you don't have amazon prime, you should have amazon prime. It's well worth the free 2-day shipping on all of the weird stuff I order on there. Like knifeless tape, because where else would you buy that?
The following 2 users liked this post by rmaas:
Brett2013fx4 (07-30-2016),
livinfast85 (07-29-2016)
#6262
Senior Member
Late summer sunsets rival mid winter ones.
The following users liked this post:
shelby500_35 (08-01-2016)
#6265
2012 Model. I ran the stockers down to the wire at 60K, just installed Fox 2.0 Coilovers and shocks myself a few months ago. 305/65R18 BFG KO2's and Method NV Wheels +18. I've put almost 3k miles so far on this set up and couldn't be more pleased. Body roll is practically gone and the suspension is plush now, stiff and soft where it needs to be. The tires are awesome too, very quiet. Did notice a small power drop, but as expected. This is a truck, not a race car! No rubbing except at full lock turning left and I would have to hit a dip for it to hit, minor and nothing to worry about. I suggest anyone who is on the edge about leveling these trucks out, do it right and spend the extra money on new coil-overs/shocks and not just a cheap spacer kit
#6267
Senior Member
2012 Model. I ran the stockers down to the wire at 60K, just installed Fox 2.0 Coilovers and shocks myself a few months ago. 305/65R18 BFG KO2's and Method NV Wheels +18. I've put almost 3k miles so far on this set up and couldn't be more pleased. Body roll is practically gone and the suspension is plush now, stiff and soft where it needs to be. The tires are awesome too, very quiet. Did notice a small power drop, but as expected. This is a truck, not a race car! No rubbing except at full lock turning left and I would have to hit a dip for it to hit, minor and nothing to worry about. I suggest anyone who is on the edge about leveling these trucks out, do it right and spend the extra money on new coil-overs/shocks and not just a cheap spacer kit
Truck looks great.
#6268
#6269
Senior Member
c clamp is the factory nickname for the oem grill.
The ends of the grill look like c clamps. He put on aftermarket grill.
The ends of the grill look like c clamps. He put on aftermarket grill.
#6270
Thanks Red. The level is the fox 2.0s coil overs at max height with UCA's (came from Stage3 Motorsports at the 2" height). And Just installed new fox shocks in the rear, I didn't want to swap out the stock rear block for something taller as this set up still gives me about a 1/4" rake, although from the naked eye in person it looks completely level