BulletsForFingers

Question for someone familiar with the driver side seat wiring. I'm looking for a run only hot wire. Which wire near the DSM would work for this? A wire diagram would be helpful too if anybody has one.

iRub1Out

What for? That will change everything - depending on what it is you need a hot wire for...

BulletsForFingers

I don't think it matters. I just need a ignition switched hot wire. Not driving a heavy load with it, just need to know when the truck is on.

Needs to be in the driver seat area.

sigma pi

LED lights

iRub1Out

Get a multimeter and start hunting for hot wires that are only hot when the key is on.

That's the fastest easiest way.

BulletsForFingers

No LEDs. Just need a 12V signal, but I fear everything in the seat is always hot

Just looking for some info on wires please. Does anyone know of a good resource for detailed wiring diagrams for F150s?

BulletsForFingers

Ya, unfortunately that might be my only choice. Trying to avoid tapping every wire down there as none of the connectors are exposed

RLXXI

Don't get much more detailed than what the dealer tech's use. follow link below.

http://www.motorcraftservice.com/vdi...id=pubs_wiring

.

BulletsForFingers

Thanks for the info rnlcomp.

I got those tricky connectors open and hit all the pins with the multimeter. There is no delayed accessory wire in the seat! Grr. The best I found was +6V in run which isn't exactly what I was looking for.

Oh ya and all my airbags went off.

iRub1Out

Any yellow connections, don't touch those.