F150 2X

Hello all,

Forgive me in advance for my laziness if my question is covered somewhere in the manual.

I have a Platinum Screw with the 2 position memory. My wife uses position # 2 and i use # 1.
Every morning when i get in the truck it defaults to her memory setting. I am the everyday driver of the vehicle and it squishes me all the way forward before I can select memory # 1.
NOTE: After the first use it goes back to the #1 as default for the rest of the day.

How do I get it to default back to #1 in the morning?

Extra credit question:

My driver mirror always defaults back to weird angle. Why?

shotgun

Page 134 of the Owner's Manual (PDF).

opasno

You can have it so that when your fob unlocks the truck, the memory seats will position to your preference (memory #1). When the other keys are used you can make them use memory #2.

Get in the truck and set the seat/mirrors/pedals to whatever position you want.
if you have a set button, press that then # 1 to set yours to # 1
if you don't have a set button, press and hold #1 for at least 2 seconds (You should hear a beep) to save it in memory

This should solve the driver mirror that always defaults back to a weird angle.

to program the memory seat to your key fob, follow the following instructions

If you have a SET button:
- Position everything..
- Press SET
- within 5 seconds press option 1 (assuming you're option 1)
- Press SET again
- within 5 seconds press the unlock or lock button on your fob
- Press #1 (again assuming you're option 1)

If no set button:
- Position everything..
- Press and hold #1 (assuming you're option 1) for 5 seconds. You should hear a tone after 1.5 seconds when its done saving, then a second tone is heard after 5 seconds.
- within 3 seconds press the LOCK button on the key fob
- a tone should be heard when activation is complete.

Now whenever you press unlock on your key fob, it should move the seat to your settings..

F150 2X

Thank you both very, very much.