Seat belt dinger!
#1
Senior Member
Thread Starter
Seat belt dinger!
Finally back.! Picked up a 14' fx4 screw, last night I can't seem to add a photo, Just wondering how can I shut these "dingers" off...!
#3
Preperation
1. the parking brake is set
2. truck in park
3. ignition switch is in off position
4. both seat belts are unbuckled
Disable Belt-Minder
1. turn the ignition switch to the on position, DO NOT START THE ENGINE.
2. wait until the safety belt warning light turns off. (approximately 1 minute).
* step 3 must be completed within 50 secs after the safety belt warning light turns off.
3. buckle then unbuckle the seat belt nine times, ending in the seat belt unbuckled.
* after step 3 the restraint warning light, (airbag light) will turn on for three (3) seconds.
4. within approximately seven (7) seconds of the light turning off, buckle then unbuckle the safety belt
#5
Senior Member
Thread Starter
Preperation 1. the parking brake is set 2. truck in park 3. ignition switch is in off position 4. both seat belts are unbuckled Disable Belt-Minder 1. turn the ignition switch to the on position, DO NOT START THE ENGINE. 2. wait until the safety belt warning light turns off. (approximately 1 minute). * step 3 must be completed within 50 secs after the safety belt warning light turns off. 3. buckle then unbuckle the seat belt nine times, ending in the seat belt unbuckled. * after step 3 the restraint warning light, (airbag light) will turn on for three (3) seconds. 4. within approximately seven (7) seconds of the light turning off, buckle then unbuckle the safety belt
Trending Topics
#8
Junior Member
Preperation 1. the parking brake is set 2. truck in park 3. ignition switch is in off position 4. both seat belts are unbuckled Disable Belt-Minder 1. turn the ignition switch to the on position, DO NOT START THE ENGINE. 2. wait until the safety belt warning light turns off. (approximately 1 minute). * step 3 must be completed within 50 secs after the safety belt warning light turns off. 3. buckle then unbuckle the seat belt nine times, ending in the seat belt unbuckled. * after step 3 the restraint warning light, (airbag light) will turn on for three (3) seconds. 4. within approximately seven (7) seconds of the light turning off, buckle then unbuckle the safety belt
#9
Senior Member
DaveM1992 - Will this work for my 04 f150 XLT too?
Don't have one ?
Owner Manuals ««« -click-
» Select Your Year [ Choose One ]
» Select Your Make [ Choose One ]
» Select Your Model [ Choose One ]
»
» Select Your Make [ Choose One ]
» Select Your Model [ Choose One ]
»
The following users liked this post:
Ricktwuhk (09-16-2014)
#10
Junior Member
Check your owner's manual. Don't have one ?Owner Manuals ««« -click-» Select Your Year [ Choose One ] » Select Your Make [ Choose One ] » Select Your Model [ Choose One ] »
Last edited by DaveM1992; 09-13-2014 at 07:20 PM.